How to clean the concrete batching plant?
Article source: Zhengzhou Jianxin Release time: 2017-08-10 15: 02
Where do they need to pay special attention when clean concrete batching plant for Zhengzhou Jianxin Machinery Manufacturing Co., Ltd?
With the development of China in recent years, the transformation of the old city and other aspects of the development, the construction of roads, bridges, housing is the rapid development. Concrete is the most important material in the construction, and the concrete mixing station is a variety of construction site mixing equipment. Compared with the bridge machine and crane, the maintenance of the mixer is relatively easy, but can not be ignored. Perhaps a small detail will directly affect the use of concrete mixing station. For example, cleaning the concrete mixing plant.
Please pay attention to the following when cleaning the concrete mixing plant:
To start with, making regular maintenance procedures under the provisions of the maintenance operations, such as cleaning, lubrication, refueling and so on.
Secondly, it is forbidden to remove the concrete accumulated in the concrete mixing station tube with a sledgehammer method, which can only be removed with a chisel.
Thirdly, in the cold season, the water is used to clean the drum concrete mixer after the work is finished. And the water pump, the water tank and the water in the water pipe are put off, so as to avoid the water pump, the water tank, the water pipe are frozen.
Fourthly, to first check if the controller of concrete batching plant is good before starting. After putting water and stones into the mixing tube within 10 to 15 minutes for cleaning, and then clear the water and stones. If the operator is required to enter the mixing cylinder to clean, in addition to cut off the power and remove the fuse, and to lock the switch box.